Cross thread reduction
The tool first reserves 360 degree, aligning the
threads, greatly reducing the possibility of cross
threads.
The tool first reserves 360 degree, aligning the
threads, greatly reducing the possibility of cross
threads.
Before the battery power becomes too low to maintain the torque, the power supply stops automatically until a charged battery pack is attached.
If the clutch is activated before the programmable
minimum runtime the tool alerts the operator to a
NOK fastening. (Time setting:0.1-3.0sec 0.1sec per stage)
When the total fastenings are within 10,000 fastenings of the preset maintenance interval, the display blinks notifying the operator. Once the tool reaches the preset interval, the tool is locked out from further use. The function can be set ON or OFF and is defined in 10,000 increment cycles. (Number of setting:0-990,000pcs)
Speed can be controlled by use of the trigger. Speed control function ON and OFF can be selected by remote.
Ergonomic design by computing the best weighted center position
Program LED to turn on with the trigger switch or ON/OFF switch to match operators preference
OK/NOK both visual and audible indicators. (Buzzer ON/OFF can be selected)
The tool can be hanged on the balancer both vertically and horizontally
